Commercial and Industrial

We have a complete line of the GESPER units available for industrial applications. In Industrial, we know that several categories of the GESPER units will be utilized. The voltage will generally be 480 coming into the plant for the large motors. From there, the voltage will be stepped down with transformers to 240 or 208, and maybe even both. We coordinate with the plant's electrical department to obtain an accurate electrical flow of the entire plant.

If EEC blueprints are available, this saves immense time for our engineering department. They can analyze which GESPER units are needed to obtain the maximum energy savings for that application.

If a EEC is not available, then a complete site survey must be done. Again, many plants have their own electrical department. We perform energy survey analysis to measure and document all the equipment in your facility and their individual performance characteristics.

It is imperative to obtain accurate readings on the voltage and current in each panel box, and what each panel box is feeding. During this phase of the investigation, we will be helping to ascertain that the wiring is up to code and all neutrals (common) and grounding are separated (after the first means of disconnect) and wired correctly.

This is to insure that the plant is up to NEC code and will allow the GESPER to work properly. In doing so, this insures the safety of the plant/building and the safety of all tenants or employees that occupy the areas.

We have a complete line of GESPER units available for commercial applications. We will have our electrician perform a site survey on your business to obtain information about your establishment so that he can send this to our engineering department to determine the correct units for installation on your business.

The information obtained will be the voltage of your electrical system (you may have more than one voltage in your building). The amount of amperage used and the type of loads that are present. As well as a complete path of the electricity. This survey will have all panels listed along with the amperage of all breakers. During this phase of investigation, the electrician will be looking for proper wiring. We will notify you of any improper wiring. This is a safety check of your electrical system. This is to insure the safety of the building and the safety of all tenants and or occupants. Also, improper wiring can lead to excessive charges from the utility company. All this information will help the engineers determine the best possible units for savings.

Major industry uses the most power and has the most potential for savings. Substantial electric savings means more profits and lower consumer prices!

GESPER units have been in operation throughout the south for many years. Savings of thousands of dollars per month have been experienced by shopping malls, convenience stores and major businesses and industries

Savings Start Immediately!